• Vibratory Drivers and Extractors
    +

    These vibratory drivers / extractors are designed and manufactured in the USA by ICEŽ, a world leader in cost-effective foundation equipment since 1974. We continue to provide innovative products to our customers and the highest quality parts. ICEŽ power units run CAT diesel engines for unit reliability and easy access to parts and service from anywhere in the world. Our hammers utilize an open-loop hydraulic system to maximize efficiency and reliability, while our gear case design provides maximum pile amplitude and is light weight.* All ICEŽ units use the highest quality pumps and motors.

    ICEŽ believes the expense of operating the equipment for our customers and the environment are equally important. The power unit has duplicate electronic controls via a remote control pendant for both safety and fuel efficiency. Our computerized power units can also pinpoint repair needs and provide other diagnostics. ICE power packs utilize Chevron ClarityŽ non-toxic, biodegradable hydraulic oil and have a heavy-duty steel enclosure and fuel-tank subbase to protect the power unit and the environment.
    With our Patented Dual-pull TM suppressor available in a majority of our units, ICEŽ vibratory drivers / extractors are able to provide maximum vibration isolation during driving and extraction combined with high pulling capacity for tough extraction jobs. ICEŽ offers a full range of clamps and accessories for all types of piling jobs including our specialized V clamp. **
    * Contact sales@iceusa.com for specific detail & clarification adapting our units for underwater usage and for specific detail & clarification of all hammer clamps and accessories specific to each model.
    Models
    How a Vibratory Pile Driver/Extractor Works
    Model 2 with 50
    Model 216D with 150G
    Model 14C with 230G
    Model 14D with 230G
    Model 22D with 350G
    Model 28C with 350G
    Model 28D with 350G
    Model 44B with 595G
    Model 817 with 595G
    Model 50B with 595G
    Model 55B with 595G
    Model 55C with 800G
    Model 66C with 800G
    Model 77C with 800G
    Model 84C with 800G
    Model 84C with 1200E
    Model 110C with 1200E
    Model 110C Tandem with 1200E
    Model 130C with 1200E
    Model 200C with 1600E

     
  • Vibratory Drivers and Extractors - Tier IV
    +

    Models
    Model 22D with 350T
    Model 28D with 350T
    Model 44B with 580T
    Model 50B with 580T
    Model 55B with 580T
    Model 55C with 800T
    Model 66C with 800T
    Model 77C with 800T
    Model 84C with 800T

     
  • ZR-Vibratory Drivers/Extractor
    +

    ICEŽ Zero Resonance vibratory driver / extractors eliminate vibration in the damaging range by adjusting eccentric moment to zero during start-up and shut-down.

    Prior to start-up, the eccentric moment is set to zero.
    During start-up, vibrator frequency passes through 600-1200 vpm with zero eccentric moment and no disturbance in the soil, structures or crane line.
    After full operating frequency (2000-2300 vpm) is reached, eccentric moment is set to maximum for driving and extracting.
    Before shut-down, the eccentric moment is again set to zero.
    During shut-down, vibrator frequency again passes through 600-1200 vpm with zero eccentric moment and no disturbance in the soil, structures or crane line.
    The ICEŽ ZR vibratory driver/ extractors are designed to never operate at a frequency range that could cause resonance vibration to the soil, structures or crane line.

    Eccentric moment is controlled from the vibrator remote-control pendant. Shifting between zero and maximum eccentric moment occurs simply and quickly.
    Models
    Model 18ZR with 350GZ
    Model 25ZR with 350GZ
    Model 50ZR with 595GZ

     
  • Vibratory Clamps
    +

    Models
    Clamp Summary
     
  • Power Units
    +

    Models
    230G
    350CE
    350G
    450G
    580G
    580Q
    595G
    700G
    800G
    1200G
     
  • Metric Vibratory Drivers/Extractors
    +

    Models
    16C with 230M
    416L with 350G
    32B with 350G
    32C with 350G
    32D with 350G
    52B with 595G
    595G
    58B with 595G
    78C with 800G
    92C with 800G
    128C with 1200G
    142C with 1200G
    V360 with 1250G
    300C with 2400G
     
  • Leads, Spotters, Drive Caps and Accessories
    +

    Models
    Leads
    Offshore Leads
    Fixed Extended Leads
    Swinging Leads
    Pin Connected Swinging Leads
    Sliding Extended Leads
    Spotters
    Drive Caps
    Dawson Shackles
    Dawson Pile Threaders
     
  • Excavator-Mounted Drills
    +

    Models
    EX-12
    EX-25
    EM-27
     
  • Excavator-Mounted Hammers
    +

    Models
    4E
    5E
    6E
    7E
    8E
     
  • Top-Drive Rotary Heads
    +

    Models
    HS27
    HS50 with 350G
    HS75 with 450G
     
  • Limited Access Hydraulic Drill Rigs
    +

    Models
    LA-4
     
  • Diesel Impact Hammers (I-series)
    +

    Models
    I-8V2
    I-12V2
    I-19V2
    I-30V2
    I-36V2
    I-46V2
    I-62V2
    I-80V2
    I-100V2
    I-125V2
    I-160V2
     
  • Diesel Impact Hammers (D-series)
    +

    Models
    D6-32
    D8-22
    D12-42
    D19-42
    D25-32
    D30-32
    D36-32
    D46-32
    D50
    D62-22
    D80-32
    D100-13
    D125-32
    D138-32
    D160-32
    D180-32
    D225-22
    D250-22
    D280-22
     
  • ICE Pilemer - Hydraulic Impact Hammers
    +

    Models
    IP2/DKH-2U
    IP3 / DKH-3U
    IP4/DKH-4U
    IP5 / DKH-5U
    IP7/DKH-7U
    IP10/ DKH-10U
    IP1516
    IP1520
    IP1530
    IP1540
    IP1560
    IP1640
     
  • Comacchio Drill Rigs
    +

    Models
    NEW MC 400 with ICE 85 PU
    MCF04.1
    MC 400
    MC 405
    MC 602
    MC 800
    MC 900 GT
    MC 1200
    IP1530
    IP1540
    IP1560
    IP1640
     
 
 
 

 
 
 
 
 
Š 2011 Sugam Infrastructure Limited. All rights Reserved.  

Home / Media / Contact